BendPak PCL-18B-8 Mobile Column Lift / Low Voltage / 144,000-lb Capacity / SET OF 8

100% FREE SHIPPING AND DELIVERY!

When you need to lift beyond what most shops even consider possible, put 8 mobile column lifts in your shop. The best part: you don't even have to use all 8 at once. Break them up into sets of 4, lifting multiple heavy-duty trucks up to 72,000 lbs. with each set. These mobile lifts make up BendPak's most powerful lifting system to date. If you need to lift more than 40,000 lbs., which is the most our four-post lifts can handle, a heavy-duty set of mobile column lifts is your best bet.

Features

• Lifting Capacity: 18,000 lbs. (8,165 kg)
  
• Overall Height: (RAISED) 101” (2,565 mm)
  
• Overall Height: (LOWERED) 146.5” (3,721 mm)
  
• Max. Lifting Height: 71.5” (1,889 mm)
  
• Overall Depth: 48.75” (1,238 mm)
  
• Overall Width: 45” (1,143 mm)
  
• Chassis Length: 32.25” (819 mm)
  
• Min. Lifting Fork Width: 9.5” (241 mm)
  
• Max. Lifting Fork Width: 35” (889 mm)
  
• Lifting Fork Length: 11.5” (292 mm)
  
• Turning Circle: 40” (1,016 mm)
  
• Column Weight: 1,450 lbs. (657 kg)
  
• Lifting Speed: 85 sec
  
• Meets or exceeds the standards prescribed by ANSI/ALI ALCTV-2017
  
• Just three 30’ cables are used leaving the front or back of the lift clear of cable obstructions
  
• Intuitive controls allow the lift to be fully programmed and controlled from any column
  
• Smart electronics feature self-diagnostics and self-calibration functions
  
• Sealed and enclosed linear potentiometers feature
  
• precision potentiometric output and high-frequency
  
• response for precise synchronization and communication
  
• of all columns through all cycles for precise, level lifting
  
• Height settings can be programmed for low ceiling shops
  
• Shipping Weight per Column: 1,450 lbs. (657 kg)
  
• Shipping Dimensions per Column: 106'' x 55'' x 41'' (2,696 mm x 1,397 mm x 1,041 mm)
  
• 460/380V, 50/60HZ, 3-Ph